ATL Server Library and Tools

New Post: Simple question, how to use ATL in VS2012?

freund — Fri, 31 May 2013 07:08:33 GMT

digger_semi wrote:

VS2012 does not support ATL, how to use it in VS2012?

You found the right place. My suggestion now: Download the source and compile it.

Reviewed: 9.0.70425 Alpha (Mai 31, 2013)

freund — Fri, 31 May 2013 07:05:12 GMT

Rated 5 Stars (out of 5) - It is a good release and running in VC8/9-generated code for 6 years now. Stable. Very fine that we had the chance to go on using our old code after a few changes with this project. But please don't call it "Alpha". I assume: This is THE most mature and stable lib at codeplex.

Reviewed: 9.0.70425 Alpha (Mai 31, 2013)

freund — Fri, 31 May 2013 07:04:34 GMT

Rated 5 Stars (out of 5) - It is a good release and running in VC9-generated code for 6 years now. Stable. Very fine that we had the chance to go on using our old code after a few changes with this project. But please don't call it "Alpha". I assume: This is THE most mature and stable lib at codeplex.

New Post: SDL1005 Error for Sproxy.exe

micbsv — Tue, 23 Apr 2013 23:35:55 GMT

gbuddell, thanks a lot for your reply!

Commented Issue: SPROXY ignores minOccurs="0" [4118]

icnocop — Thu, 11 Apr 2013 01:18:10 GMT

Currently the stub generation does not take the special case of minOccurs="0" into consideration. It should treat these items the same as if the wsdl has specified nillable="true" as per Trevors previous fix.

Gordon
Comments: ** Comment from web user: icnocop **

Schmoo has uploaded [patch #456](https://atlserver.codeplex.com/SourceControl/list/patches) for this issue.

Commented Issue: Make ATLPref work under Vista [6815]

icnocop — Thu, 11 Apr 2013 01:09:14 GMT

The pref objects don't work under Vista, there seem to be two problems with it:
Comments: ** Comment from web user: icnocop **

There is a duplicate issue here: [Perfomance Counter Support in Vista](https://atlserver.codeplex.com/workitem/9279)

Commented Issue: Perfomance Counter Support in Vista [9279]

icnocop — Thu, 11 Apr 2013 01:08:54 GMT

The performance counter support in Vista is broken.
Comments: ** Comment from web user: icnocop **

See this related issue: [Make ATLPref work under Vista](https://atlserver.codeplex.com/workitem/6815)

New Post: ISE Error SDL0000 : Internal Sproxy Error (most likely out of memory).

donjuan201 — Wed, 03 Apr 2013 13:14:10 GMT

Hi Marcos,

Thanks for the reply, I have tried using the same command that you used above and still I get the same error. Even when trying to build the header file using the weather web service I still get the same error.

I am not sure if this is linked to my OS or possibly a missing reference somewhere? I am using Windows 7 64bit.

Will debug the sproxy source in VS and see if I can find more details...

Thanks again...

New Post: ISE Error SDL0000 : Internal Sproxy Error (most likely out of memory).

marcosmrs — Wed, 03 Apr 2013 12:59:27 GMT

Hi.
I've just compiled sproxy in VS2012 ant it's working fine.
I tested with one server from http://www.webservicex.net/ws/default.aspx that shows the global weather forecast: http://www.webservicex.net/globalweather.asmx?WSDL

I managed to create the header file with the following command:

.\sproxy.exe /wsdl http://www.webservicex.net/globalweather.asmx?WSDL /out:weather.h

where "weather.h" is my output file.

What command are you using to try to create the header file?

Marcos

New Post: ISE Error SDL0000 : Internal Sproxy Error (most likely out of memory).

donjuan201 — Wed, 03 Apr 2013 11:49:26 GMT

After following a lot of different tutorials on building and configuring the sproxy addition to VS2008 I finally got everything up and running.

I now sit with the above SDL0000 error when trying to generate a header file to include in my project. I am not sure why this error was generated so I went through the source code and the error is linked to the sproxy.cpp file when evaluating the arguments. I have tried various different combinations of arguments to get my header file generated without any luck?

If anyone has encountered the same error or know of a possible solution please assist?

New Post: Simple question, how to use ATL in VS2012?

digger_semi — Wed, 06 Mar 2013 12:35:48 GMT

VS2012 does not support ATL, how to use it in VS2012?

New Post: VS2012 compatibility

vyemialyanchyk — Thu, 20 Dec 2012 00:57:32 GMT

I've got the same question...

New Post: Is someone on this project looking into the .rdata issue?

bwengert79 — Fri, 30 Nov 2012 22:28:21 GMT

I'm using VS2012 and ran into the same issue. If you compare atlbase.h to an eariler version, such as VS2005, you'll see that these sections were changed from "read, shared" to "read".

In the ATLServer source you'll see the same sections in atlisapi.h and atlpref.h. I changed them to the following

FROM:
#pragma section("ATLP$A", read, shared)
#pragma section("ATLP$Z", read, shared)
#pragma section("ATLP$C", read, shared)

TO:
#pragma section("ATLP$A", read)
#pragma section("ATLP$Z", read)
#pragma section("ATLP$C", read)

This eliminated the compiler warning and there seems to be no unwanted side-effects.

New Post: SProxy Anyone?

bwengert79 — Thu, 29 Nov 2012 01:22:52 GMT

I've recently been experimenting with WWSAPI and discovered (like everyone else) that it's not available on WinXP, which is an issue for me as many of our clients still run XP.

This lead me to experiment with sproxy.

I've had some success making some modifications so it generates that proper code to communicate with a WWSAPI web service. However, it definitely has some issues with nested complex types or messages with more than one part.

Nested Complex Type example:
      <xsd:element name="UploadRequestType">
        <xsd:complexType>
          <xsd:sequence>
            <xsd:element name="UploadInfoType">
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:element minOccurs="1" name="name" type="xsd:string"/>
                </xsd:sequence>
              </xsd:complexType>
            </xsd:element>
            <xsd:element name="UploadDataType">
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:element minOccurs="0" name="data" type="xsd:base64Binary" />
                </xsd:sequence>
              </xsd:complexType>
            </xsd:element>
          </xsd:sequence>
        </xsd:complexType>
      </xsd:element>

Message Part Example:
<wsdl:message name="IFileManager_Upload_InputMessage">
<wsdl:part name="theInfo" element="tns:UploadInfoType" />
<wsdl:part name="theData" element="tns:UploadDataType" />
</wsdl:message>

I know I could go the .NET route but I'm a native kind of guy. Anyone out there playing around with proxy?

New Post: VS 2012 cannot find include file.

williamj77 — Mon, 22 Oct 2012 17:12:49 GMT

My solution was to create a simple test app that included a static ATL library.

Then I used the property sheet from the simple app in the original project.

Thanks.

New Post: Is someone on this project looking into the .rdata issue?

rasharm_msft — Tue, 02 Oct 2012 23:53:22 GMT

This seems to be an issue:

http://social.msdn.microsoft.com/Forums/en-US/vcmfcatl/thread/4763bc2d-0e86-45e9-bfe4-ddaa735e5ad5

Source code checked in, #94877

Project Collection Service Accounts — Mon, 01 Oct 2012 22:38:35 GMT

Upgrade: New Version of LabDefaultTemplate.xaml. To upgrade your build definitions, please visit the following link: http://go.microsoft.com/fwlink/?LinkId=254563

Source code checked in, #94876

Project Collection Service Accounts — Mon, 01 Oct 2012 22:31:06 GMT

Checked in by server upgrade

New Post: VS 2012 cannot find include file.

williamj77 — Mon, 01 Oct 2012 14:19:47 GMT

Hello,

VS 2012 says it cannot find the "atlrx.h" include file.

I simply added the include directory to an existing property sheet.

Yet, VS still can't find the file.

Any suggestions?

williamj

New Post: VS2012 compatibility

andy_p — Thu, 16 Aug 2012 18:33:57 GMT

I tried compiling with VS2012 recently, and it told me it couldn't find dbgautoattach.h when atlisapi.h tried to #include it. The issue appears at microsoft connect too, but they offer no solution except to remove the offending reference.

So I removed the #include <dbgautoattach.h> from atlisapi.h, and everything still works.

What purpose did that file serve, and what is going to stop working now it's been removed? Should we accept this as a full and proper resolution of the problem, and if so, should a new release of ATL Server be made with it removed? If not, what else can be done?